April 17, 2024

In the heart of UC's 1819 Innovation Hub lies the Ground Floor Makerspace, an advanced and active hub of ingenuity where students, faculty and the community converge to bring their ideas to life. This includes being the birthplace of robots much like miniature race cars, combating fender to fender in an enclosed boxing ring. Combat robots like UC's Maximizer will again be fighting for first place in the National Havoc Robot League (NHRL) competition, slated for April 20.

April 17, 2024

Researchers at the University of Cincinnati are developing a VortexPAP machine that takes advantage of vortex airflow technology. A preliminary clinical study with current CPAP users demonstrated that the VortexPAP can deliver the pressure levels that are used in the subjects’ CPAP therapy, but the mask is more comfortable to wear. It has a minimalistic design that is less intrusive and barely touches the patient’s face.

April 16, 2024

University of Cincinnati alumna Emma Wilhelmus fell in love with engineering when she was in ninth grade. After taking drafting, architecture and engineering courses in high school, she set out to major in architectural engineering in college. Now, she is an engineering teacher at a local high school and hopes to inspire students.

April 16, 2024

University of Cincinnati President Neville G. Pinto shared his 2024 Sate of the University address with the campus community on April 15.

April 15, 2024

Ground transportation has a substantial impact on the daily lives of humans. Sai Bonthu, a doctoral candidate of electrical and computer engineering at the University of Cincinnati, is working to develop a product that has the potential to accurately reduce traffic accidents. Currently, he is working on a grant with the Ohio Department of Transportation and was named Graduate Student Engineer of the Month by the College of Engineering and Applied Science.

April 15, 2024

Ever since she garnered an appreciation for chemistry in high school, fifth-year University of Cincinnati student Jaclyn Bashore has not looked back. When she graduates with a chemical engineering degree and a minor in chemistry this spring, Bashore will have had six co-op experiences — along with a new full-time job at AbbVie, a biopharmaceutical research company with whom she did two co-op rotations. To commemorate her exceptional co-op work, the UC College of Engineering and Applied Science awarded Bashore the 2024 Herman Schneider Medal, an annual award given to a graduating senior who demonstrates outstanding success as a co-op student.

April 11, 2024

The University of Cincinnati has a longstanding presence in the Formula Society of Automotive Engineers (FSAE) competition. For several decades, UC students have built Formula and BAJA style cars to race and compete against schools nationwide at various competitions. However, with the emergence and growth in popularity of electric cars, one student set out to make UC's very first electric vehicle team. Bearcat Electric Vehicle (BEV) was founded by UC alumnus Sagar Tawari, during his time as a student. In the 2019-2020 academic year, Tiwari recruited members and created the university's first all-electric formula racing team.

April 10, 2024

Navigating life at university is difficult for any college student, but those common challenges are magnified for international students, who also contend with language barriers and cultural differences along the way. Two pairs of international student siblings at the University of Cincinnati—Hamza and Anas Khairy as well as Khwahish and Kartavya Singh—decided to pursue their degrees side by side.

April 5, 2024

Cincinnati's Flying Pig Marathon ranks No. 1 in USA Today’s 10Best list of top-rated marathon, beating out 20 other marathons across the country. The list highlights the race’s fun pig theme, its scenic 26.2-mile route along the Ohio River through diverse neighborhoods across Cincinnati and Northern Kentucky, and a post-race party with pizza and beer.

April 4, 2024

By combining existing mammograms with its artificial intelligence, a University of Cincinnati-backed startup hopes to detect heart disease and save lives, Spectrum News reported.

April 4, 2024

University of Cincinnati professor Kishan Bellur is captivated by evaporation - a phenomena that is happening all the time, all around us, but few of us notice. Most liquid surfaces, for example, water in a test tube, are not flat. There is a slight curvature to it called the meniscus. As the liquid evaporates, it climbs up the side of the tube forming a very thin liquid film that is hard to see with the naked eye. Understanding the evaporation process and the behavior of these films are the focus of Bellur's latest research.

April 3, 2024

As one of the largest co-op employers in the region and a leading provider of innovative technologies for the treatment of Atrial Fibrillation and other related conditions, AtriCure, Inc. is also one of the largest co-op employers for students at the University of Cincinnati. In fact, they are the number one co-op employer for biomedical engineering students at the College of Engineering and Applied Science. Co-op is integrated into all CEAS undergraduate programs, enabling students to alternate semesters in the classroom with semesters of full-time, paid, co-op work.

April 2, 2024

University of Cincinnati alumnus Jason Harbert attended the College of Engineering. He is the co-founder and chief technology officer (CTO) of Flowspace, partnering with CEO Ben Eachus. They combined their passion, skillsets and experience to create a cutting-edge full-service fulfillment management solution for direct-to-consumer (DTC) and business-to-business (B2B) models.

With more than 300 majors and 100 certificate programs, the University of Cincinnati offers an education that’s both rigorous and relevant. From psychology to engineering, here are the most popular majors at UC.

April 1, 2024

During spring break, the University of Cincinnati's 1819 Innovation Hub Makerspace is typically a ghost town. After opening the space during "Maker Break," UC faculty and students populated the 12,000-square-foot prototyping and fabrication haven in a win-win opportunity, acquiring machine certification and the time to complete their senior capstone and passion projects.